Solvent-free wetting and dispersing agents BYK111 Paint Dispersing Agent
GENERAL DESCRIPTION
Anjeka6111 is a wetting and dispersing agent for solvent-based and solvent-free coatings, designed to improve pigment wetting, reduce grinding time, and stabilize pigment dispersion.
PRODUCT DATA
Chemical Composition: Copolymer solution with acidic groups
Note: The data provided on this sheet are typical values and not product specifications.
| Appearance: | Colorless to pale yellow fluid |
| Acid Value (mgKOH/g): | 150—250 |
| Density g/cm³ (23℃): | 1.13-1.23 |
| Viscosity cps (25℃): | 250-450 |
| Non-volatile content (%): | 98 |
| Flash Point: | >100℃ |
STORAGE and TRANSPORT
Possible separation and cloudiness may occur at temperatures below 10˚C. Heat to 20˚C and thoroughly mix before use. Recommended storage time is not more than 12 months.
SPECIAL NOTES
This product should be stored in a sealed container and cannot be stored after dilution.
APPLICATION GUIDELINES
Industrial Coatings
Characteristics and Advantages:
Anjeka6111 is primarily used in high-solid and solvent-free coatings. Due to its anionic nature, it is well-suited for acid-catalyzed systems (e.g., coil coatings). Anjeka6111 stabilizes inorganic pigments, especially titanium dioxide, enhancing gloss, reducing haze, and significantly lowering the viscosity of grinding media. It can be used together with pigment pastes stabilized with the Anjeka series additives.
APPLICATION SECTORS
Industrial Coatings: ●
Automotive Coatings: ●
Coil Coatings: ●
Corrosion Protection Coating Systems: ●
(●——Highly recommended; ○——Recommended)
RECOMMENDED LEVELS
Additive levels (as purchased) based on pigment:
Inorganic pigments: 2%—5%
Titanium dioxide: 1%—3%
The above data are empirical levels; the optimal levels need to be determined through a series of experiments.
PROCESSING INSTRUCTIONS
For optimal performance, add the additive to the grinding media before introducing the pigment.
PACKAGING
25kg lined iron drums
180kg plastic drums
