Dispersing agents Paint Dispersing Agent Compatible with most paint systems
GENERAL DESCRIPTION
Anjeka6111 is a wetting and dispersing agent for solvent-based and solvent-free coatings, designed to improve pigment wetting, reduce grinding time, and stabilize pigment dispersion.
PRODUCT DATA
Chemical Composition: Copolymer solution with acidic groups
Note: The data provided on this sheet are typical values and not product specifications.
| Appearance: | Colorless to pale yellow fluid |
| Acid Value (mgKOH/g): | 150—250 |
| Density g/cm³ (23℃): | 1.13-1.23 |
| Viscosity cps (25℃): | 250-450 |
| Non-volatile content (%): | 98 |
| Flash Point: | >100℃ |
STORAGE and TRANSPORT
Possible separation and cloudiness may occur at temperatures below 10˚C. Heat to 20˚C and thoroughly mix before use. Recommended storage time is not more than 12 months.
SPECIAL NOTES
This product should be stored in a sealed container and cannot be stored after dilution.
APPLICATION GUIDELINES
Industrial Coatings
Characteristics and Advantages:
Anjeka6111 finds its primary application in high-solid and solvent-free coatings. Its anionic properties make it particularly suitable for acid-catalyzed systems, such as those found in coil coatings. By stabilizing inorganic pigments, particularly titanium dioxide, Anjeka6111 contributes to improved gloss, minimized haze, and a substantial reduction in the viscosity of grinding media. Additionally, it seamlessly integrates with pigment pastes that have been stabilized using additives from the Anjeka series.
APPLICATION SECTORS
Industrial Coatings: ●
Automotive Coatings: ●
Coil Coatings: ●
Corrosion Protection Coating Systems: ●
(●——Highly recommended; ○——Recommended)
RECOMMENDED LEVELS
Additive levels (as purchased) based on pigment:
Inorganic pigments: 2%—5%
Titanium dioxide: 1%—3%
The above data are empirical levels; the optimal levels need to be determined through a series of experiments.
PROCESSING INSTRUCTIONS
For optimal performance, add the additive to the grinding media before introducing the pigment.
PACKAGING
25kg iron drums
180kg plastic drums
