Pigment dispersing agent wetting dispersing agent BYK110 suitable for solvent-borne and solvent-free coatings
DESCRIPTION
Anjeka 6110 is a wetting and dispersing agent for solvent-borne and solvent-free coatings, and printing inks. Anjeka 6110 can stabilize the inorganic pigments, especially titanium dioxide, and significantly reduce the millbase viscosity.
PRODUCT DATA
Composition
Solution of a copolymer with acidic groups.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Acid value: |
55-63 mg KOH/g |
| Density: |
1.02 g/ml (20℃) |
| Viscosity: |
20-50 cps (25℃) |
| Non-volatile matter (20min,150℃): |
50% |
| Solvent: |
triethylene glycol butyl ethe r/xylene |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur during storage or transportation below 0 ℃. Heat to 30-40℃ and mix well before use.
ATTENTION
Because of its high acid value, the additive may potentially accelerate the reaction of baking systems. Check the increase in viscosity during storage is necessary.
APPLICATION
Industrial coating and printing ink
Characters and advantages
Anjeka 6110 employs steric stabilization to disperse pigments, resulting in minute particle sizes. This enables the attainment of elevated gloss levels and enhances color strength. Moreover, the transparency of transparent pigments and the hiding power of opaque ones are heightened. A substantial reduction in viscosity occurs, leading to improved flow characteristics and allowing for higher pigment loading. This, in turn, enhances the performance of inorganic pigmented coatings processed through electrostatic high rotation techniques by markedly reducing haze.
RECOMMENDED USE
Anjeka 6110 is recommended for all solvent-borne and solvent-free coatings and printing inks to stabilize inorganic pigments, especially titanium dioxide. Its anionic character makes it ideal for acid-catalyzed systems (e.g. coil coatings).
RECOMMENDED ADDITION LEVEL
The amount of additive (supplied form) is based on the pigment.
Titanium dioxide: 2-4%
Inorganic pigment: 5-10%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
PROCESSING INSTRUCTIONS
For the best performance, the additive should be added into the millbase before the pigment added.
PACKING
25KG iron drum
200KG plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Your message must be between 20-3,000 characters!
